CHARGERY website in Chinese Chargery power is a professional manufacturer for top qulity RC power products including chargers,balancers,adapters and balance chargers
Charger & Balancer
Charger
Balancer/BMS
Power Supply
Balance Charger
LiPo/Li-ion Battery
Accessories
Total Solutions
Specification
Technical Reference

 

 
  home > Products and Solutions > Charger and Balancer > Balancer
 


Smart Balancer for LiPo/Li-ion batteries pack
2-6S liPo battery balance system
 

B6 is a high performance Li-ion/LiPo balancer, it has a microprocessor to detect and balance each cell voltage of the 2 to 6 cells in series.

LED indicate the balance state of the battery pack, ¡°FLASH¡± shows the high voltage cell is discharged till the difference of voltage reaches the lowest level. If all LEDS are off, your battery pack is balanced.

 

Cooperation with charger, the built-in software can detect the cell voltage in charging. When any cell voltage reaches 4.25v, it will buzz to prevent the battery overcharged

2 to 6 lipo cells balancer

2 to 6 lipo cells balancer

B6 is the smallest balancer, its size is 72*42*13.5(mm)

user's manual (151K)

 
B6 independently work, it doesn't  need any input, just connect the B6 to the balance connector on your pack.  It automatically balance instantly until the pack is balanced.
 

Feature£º

  1. Automatically detect and display battery balance status for any 2 to 6 cells pack
  2. Imbalance voltage warning and balancing
  3. Audio alarm for over voltage
  4. Audio alarm for under voltage
  5. LED(s) display each cell in balancing
  6. Alerts full charge status
  7. Balance 2 battery packs simultaneously
  8. With Special Connector Conversion Board(CCB) to fit all kinds of battery connectors

General Specifications:

  1. Operating Temperature:                  0~40¡æ
  2. Storage Temperature:                    -20~85¡æ
  3. Operating Relative Humidity:         5~95%RH

Mechanical Characteristics:

  1. Dimension: 72*42*13.5(mm, L*W*H)
  2. Case Material : Al alloy
  3. Balances Connector : JST EHR 6PIN
  4. weight:50g

Safety Certification:CE

B6 is fully committed to compliance with the European Union¡¯s RoHS directive.

 

Related Products:

Chargery Balancer connector  Conversion Board (CCB)

  1. The CCB is designed to connect the Chargery Balancer to the different brand LiPo battery packs with different balance connector, include TP, KOKAM, Flightpower, Polyquest, Electrifly etc.
  2. The CCB is used to connect the B6 and 2 - 6S lipo battery packs.
  3. To use CCB, you can balance 2 LiPo battery packs at the same time, such as two 3S, or three 2S
  4. Size:70*40*8(mm,L*W*T)
  5. Weight:10g

 

Conversion Wire( CEHP-7)
 
CCB-7 For 2S, 2*3S, 4S, 5S, 6S Kokam and Align batteries pack

CCB-7N For 3*2S, 2*3S, 4S, 5S, 6S  Kokam, Align batteries pack

Adapter wire adapter board adapter board for different pack
CCB-723 for 2*3S and 3*2S Kokam and Align batteries pack CCB-7TPQF for 2S, 3S, 4S, 5S, 6S TP, Flightpwer and Polyquest, Hyperion batteries pack CCB-723TPQF for 2*3S and 3*2S TP, Flightpower and Polyquest, Hyperion batteries pack
adapter board for 2*3S and 3*2S pack adapter board adapter board for 2*3S and 3*2S pack
 
Other Smart Balancers are as follows, click model directly to get the product details.
Click the model for other Smart Balance Chargers:
 
   

 

Ö÷Ò³

Chargery Power Co.,Ltd. Copyright ©2024, All rights reserved. welcome to www.chargery.com